PreSonus DigiMax FS - Manual (Page 13)

APPLICATIONS
control panel software application and/or your multi-channel recording application.
Using the DigiMax FS with Pro Tools
Below are instructions on setting up a Digi002 with ProTools LE Software (other ProTools
systems with ADAT light pipe input are similar)
1.) Plug in the ADAT cable from the optical output of the DigiMax to the optical input of the
Digi002.
2.) ProTools LE: enter the Setups menu > Hardware Setup. Ensure "RCA = S/PDIF,
Optical = ADAT" is selected & Clock is set to "ADAT".
13