Yokogawa 212 Heat Calculator - Manual (Page 19)

3.1.2 Charge/Discharge Operation
If Charge/Discharge operation is programmed, the following display formats will
be apparent in place of the normal ENERGY display:
Charge Energy default display -
Charge Energy measured since the
last reset.
Press DISPLAY Press ACCUM TOTAL
Accumulated Charge
Energy Total
(non-resettable).
Discharge Energy measured since the
last reset.
Press DISPLAY Press ACCUM TOTAL
Accumulated Discharge
Energy (non-resettable).
Press DISPLAY Press ACCUM TOTAL
Display segments test. Segments are
flashing.
Press DISPLAY
For continuation of displays refer to Section 3.1.1 Normal Operation.
Operation 17
(1 &+5 .:K
(1 ',6 .:+
7(67
$&&80 .:K
$&&80 .:+
⇓ ⇓
⇓ ⇓
⇓ ⇓
⇓