Audiovox FPE1705 - Manual (Page 18)

Basic Operations
Turning on
Turning off
Selecting input signal
1
Connect the power correctly, then the red indicator lights up and the
unit is in STANDBY mode.
2
Press the POWER ( )button on the remote control or on the unit to
turn on the TV set.The indicator LED will turn to yellow.
If you want to turn off the power completely, unplug the power cord
from the wall outlet.
Note: Do not switch the on/off state of the unit quickly. The interval of
the turning on and turning off should be more than 5 seconds.
With the power on, press the POWER ( ) button to turn off the TV and
put the TV in STANDBY mode, the indicator LED will turn to red.
1
Press the SOURCE button on the unit or
button on the remote control. The screen
displays the menu as shown on the right.
2
Press CH5/6 to highlight your desired
input signal source. Press VOL+/- or wait
for about 4 seconds and the desired signal
SOURCE
TV
AV
SVIDEO
YPbPr/YCbCr
VGA
Note:
All buttons shown in the manual are located on the
remote control unless otherwise indicated.
18
1
2
S.M
TV