En g l is h english – Pfister VTP-E31W User Manual

Page 3

ENGLISH

ENGLISH

8 WAX SEAL INSTALLATION

Carefully turn

Toilet’s Base (8A)

on it’s side on top of a Secure Padded Surface (8B).

Place Wax Seal (8C) fi rmly into the outlet of the toilet bowl.

9 TOILET BOWL INSTALLATION

A. Place

Toilet’s Base

(9A) onto Waste Outlet Hole (9B) with Tee Bolts (9C) passing

through Fixing Holes (9D).
B.

Place the Plastic Washer (9E) and Metal Washer (9F)

onto Tee Bolts

(9C). Secure

by tightening the Mounting Nuts (9G) on to the

Tee

Bolts.

Do not over tighten!
Snap on Plastic Caps (9H) over bolts and nut as shown.

10 TANK INSTALLATION

The tank comes pre-installed with fl ushing mechanism. Attach Large Hose Nut (10A)
to Fill Valve Shank (10B) located on bottom of Tank (10C). Insert Rubber Gasket (10D)
into Water Inlet Hole (10E) on top of Bowl Shelf (10F). Place Tank (10C) on top of Bowl
Shelf (10F) and align Brass Bolts (10G) and insert Hose (10H) through corresponding
Shelf Holes (10J). From underneath bowl, screw Locking Nuts (10K) and Washer (10L)
onto Brass Bolts (10G) and tighten.
Do not over tighten!

11 WATER SUPPLY CONNECTION

Connect Short Hose Nut (11A) onto Water Supply Valve (11B). Turn on Water Supply
Valve (11B) by turning Handle (11C) counterclockwise.

12 INTERNAL PLUMBING

Tank comes pre-installed with fl ushing mechanism. (Some adjustments may be
necessary).

11C

11A

11B

10J

10H

10C

10D

10G

10E

10F

10A

10L

10K

10B

OPEN