Pfister VTP-E40W - Manual (Page 5)

E
N
G
L
IS
H
ENGLISH
ENGLISH
16 TOILET SEAT COVER INSTALLATION
A. From below Toilet Bowl (16A), insert Anchors (16B) into Seat Post Holes (16C). From
above Toilet Bowl (16A), place Rubber Plates (16D) and Adapters (16E) over Seat Post
Holes (16C). Place Washers (16F) over Adapters (16E) and secure with Long Screws
(16G) as shown.
B. Insert Hinges (16H) into Seat Holes (16J) as shown.
C. Attach Seat (16K) to Toilet Bowl (16A) by placing Hinges (16H) over Adapters (16E).
Secure Seat (16K) by tightening Screws (16L). Insert Covers (16M) into Hinges Holes
(16N) as shown.
MAINTENANCE & CARE
DISASSEMBLY:
1. Replacement parts may be available at the store where you purchased
your toilet.
2. When replacement parts are not available, please write or call Price Pfi ster
Consumer Service.
3. Always turn off water and relieve pressure before working on your
toilet.
CARE:
Cleaning Instructions:
Use only a soft damp cloth or sponge to clean and shine. Use mild detergent,
liquid dish washing soap or warm water for cleaning. Read the cleaner product
label before using. Use of polish, detergents, abrasive cleaners, organic
solvents or acid may cause damage. The use of in-tank cleaners or products
containing calcium hypochlorite can damage fi ttings in the tank. Use of other
than a soft damp cloth or sponge will nullify our warranty!
Special Trim:
For more information about the installation or care and warranty information,
please contact your local Black & Decker HHI representative in your country
or visit www.pricepfi ster.com/international
5