Pfister E27-BNFC User Manual

Page 3

nuts. Remove any excess putty from around the

outside edge of the deck plate (B). To continue with

the installation, go to step 2A.

1B INSTALLING SINGLE POST RING

Pass single post ring (A) over copper inlet / outlet

tubes (B), and press onto faucet body (C). Note:

The tabs on the faucet body (C) must be aligned

to the grooves inside the single post ring (B). To

ensure this is the case, rotate the single post ring

(B). When the tabs are aligned, the ring will cease

to rotate.

2A INSTALLING THE FAUCET USING THE

OPTIONAL DECK PLATE

Ensure that the mounting gasket (A) is pressed

frimly in to the faucet body (B). Feed the pull-out

hose (C) up through the faucet body (B), until the

pull-out hose fitting is flush with the bottom of the

mounting shank (D) (see illustration). Insert the

faucet supply tubes (E) and mounting shank (D)

through the hole in the deck plate (F). Note: The

tabs on the faucet body (B) must be aligned to the

grooves inside the deck plate (F). To ensure this is

the case, rotate the faucet body (B) back and forth.

When the tabs are aligned, the faucet will cease to

Thank you for purchasing this Price Pfister kitchen

faucet. All Price Pfister products are carefully

Any questions or concerns on Price

Pfister products, contact your local Price

Pfister distributor or point of contact.

ENGLISH

10B

10A

10C

10D

10E