Pfister E27-BNFC User Manual

Page 2

Thank you for purchasing this Price Pfister kitchen faucet. All Price Pfister products are carefully engineered,

and factory tested to provide long trouble-free use under normal conditions. This kitchen faucet is easy to install

using basic tools and our easy to follow illustrated

instructions. If you have any questions regarding

your kitchen faucet installation call 1-800-Pfaucet

(1-800-732-8238).

BEFORE PROCEEDING

Locate water supply inlets and shut off the water

supply valves. These are usually found under the

sink or near the water meter. If you are replacing an

existing faucet, remove the faucet from the sink and

clean the sink surface thoroughly.

TOOLS RECOMMENDED

Pliers

Flashlight

9/16” and 11/16” open end wrenches

Adjustable wrenches (optional)

Plumber’s putty

Flaring tool (for copper tube installations)

Your installation may require supply tubes and / or

shut-off valves.

1A INSTALLING OPTIONAL DECK PLATE

(For single hole mount, go to step 1B)

Ensure that plastic putty plate (A) is pressed on to

deck plate (B). Place a bead of plumber’s putty in

in your sink. From underneath sink, hand tighten

wing nuts (C). Caution: do not over tighten wing

the goove along the outer edge of the putty plate

(A). Install the deck plate (B) over the three holes

Model E27-FNFC is shown

ENGLISH