Pfister T49-DF0C - Manual (Page 4)

E
N
G
L
IS
H
ENGLISH
ENGLISH
11
12
13
14
DRAIN BODY INSTALLATION
11 HOSE CONNECTION TO SPOUT BODY
From underneath sink, push the Center Connector (11A) onto Receiving Tube (11B),
until unable to push any further. Pull down on the quick connect housing (11A). If the
housing and the Inner Collet (11C) separate slightly but do not pull off the Receiving
Tube (11B), the connection is secure.
12 HOSE CONNECTION TO VALVE BODY
Slide the End Connectors (12A) with arrow (12D) pointing up onto the Valve Bodies
(12B). Push the End Connectors (12A) all the way up until completely seated. Be
careful not to damage O-Rings (12C). Place Clips (12E) onto End Bodies (12B) to
secure End Connectors (12A).
13 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (13A) to Faucet Inlets (13B). Hot water supply lines go into
left inlet. Cold water supply lines go into right inlet. (Supply lines not included). Please
follow manufacturer’s instructions when installing supply lines.
14 POP-UP INSTALLATION
Install and adjust Pop-Up (14A) using separate instructions supplied with the Pop-Up
assembly.
4
HOT
COLD
11A
11A 11A 11A
11B
11B 11B 11B
11C
11C 11C 11C
12A
12D
12D
12A
12C
12B
12B
12E
12E
12E
12C
13A
13A
13B
13B
14A