A.1.7 inserter, A.1.8 output stacker – AMT Datasouth 7200 User Manual
Page 70
7200 APPENDIX
APPENDIX-5
Operation Manual
A.1.7 Inserter
(1) Document feeding direction
(2) Shutter
(3) Non-standard documents inserted
(4) Document feeding
(5) Documents rejected
A.1.8 Output Stacker
(1) Capacity
(2) Document direction
(3) Full detection
A.1.9 Transfer Ribbon Printing (Type D printers only)
(1) Near-end detection
(2) End detection
(3) Breakage detection
(4) Standardization
(5) Life span
(6) Setting
(7) Multi-time print
Face side up, leading side first in
Not available
Passed back to the front inserter to be kept,
or jammed in the carrier structure
The beep sound occurs when a document is
fed normally
Passed to the output stacker
100 documents
Face side up, leading side first out
Available
Available; approximately 10 documents
before end
Available
Not available
Refer to the transfer ribbon specifications
5,000 documents per roll (maximum, while
multi-time printing)
Thermal transfer (TT)
Four stages available, set on the front
control panel