Pfister 8T5-CS0C - Manual (Page 5)

5
6 SHOWER ONLY OUTLET CONNECTIONS
(Fig.C)
Connect shower outlet pipe (1) to valve body outlet (2).
Connect a Pipe Elbow (3) (not included) to end of outlet
pipe.
7 TUB ONLY OUTLET CONNECTIONS
(Fig.D)
Connect tub outlet pipe (1) to valve body outlet (2). Route
the outlet pipe to tub outlet hole and connect a Pipe Elbow
with nipple (3) (not included) to end of the pipe.
8 PRESSURE TESTING VALVE (Fig.E)
Use an iron pipe plug (not included) on shower outlet or
tub outlet. Remove Screws (1) and Plasterguard (2) from
Valve Body (3). Perform pressure test. Look for leaks from
the outlets.
WARNING: Pressure testing is not to exceed 250 PSI.
Make sure pressure is balanced between hot and cold
inlets.
WARNING: Differential pressure of hot and cold inlets must
not exceed 100 PSI.
CAUTION: Slowly remove pipe plugs from tub and
shower outlets to relieve pressure.
1
3
2
C
1
2
3
D
1
2
3
E