Windows 3.1x, os/2 warp, dos, unixware, and linux – Actiontec electronic 56K User Manual

Page 21

Step 9

Your modem should be added to the list in Modems Properties. Click Close.

Step 8

If you wish to use your modem to dial into a Windows NT Remote Access
Server or wish to connect to the Internet, you will need to configure Dial
Up Networking.

Step 9

To install Dial Up Networking, Windows NT may request its own installa-
tion diskettes for some files. Insert the Windows NT disks or CD-ROM as
required. At the Remote Access Setup dialog box, click on Add. Select the
RAS Device you wish to add and click OK.

Step 10 Click Continue to finish the installation.

Step 11 After Windows NT has completed the binding process, allow Windows

NT to shut down and restart the computer.

Configuring Windows 3.1X, OS/2 WARP, DOS, UnixWare, and Linux

Since your External 56K Call Waiting Modem uses a preexisting COM port, con-
figuration should be automatic. The communications software provided will search
for and recognize the modem for you.