beautypg.com

English, Maintenance & care – Pfister F-043-VTYY User Manual

Page 4

background image

ENGLISH

ENGLISH

MAINTENANCE & CARE

13

15

14

CAUTION: Maintenance

DISASSEMBLY
1.

Replacement parts may be available at the store where you purchased
your faucet.

2.

When replacement parts are not available, please write or call Price
Pfister Consumer Service.

3.

Always turn off water and relieve pressure before working on your
faucet.

NOTE: Trim Care

Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:

Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com

• Installation Support
• Care and Warranty Information

13 FLUSHING & AERATOR CLEANING

After installation is complete, remove Aerator Cartridge (13A) by using Removal Tool
(13B). Turn Valves (13C) on and allow both hot and cold water to run for at least one
minute each. While water is running, check for leaks. Clean Aerator Cartridge (13A).
Once parts have been cleaned, reassemble by reversing steps.

14 HANDLE INSTALLATION REMOVAL

Turn off water before proceeding! With Valves in “Closed”. Be sure Valves and
Levers are in the “OFF” position. Remove handles by holding the Lever (14A) in place
and loosen the Hubs (14B) by rotating them in a counterclockwise direction. To attach
handles, rotate Hubs (14B) in a clockwise direction.

15 VALVE CARTRIDGE MAINTENANCE

Turn off water supplies and relieve pressure before working on your faucet.
Remove handles (See Step 14), unscrew Retainer Nut (15A) by turning it counter-
clockwise and lift out Cartridge Assembly (15B) and inspect. Replace parts as
necessary. Reassemble parts by reversing steps.

4

13A

13B

13A

13C

14A

14B

14B

14A

15A

15B