Pfister GT26-4DSS - Manual (Page 4)

ENGLISH
ENGLISH
11 13
14
12
11 SIDE SPRAY INSTALLATION
Insert Side Spray Hose (11A) through Hose Guide (11B).
12 DIVERTER INSTALLATION
Push Diverter Tee (12A) all the way up until completely seated onto Mounting
Shank (12B). Slide Clip (12C) into Diverter Holes (12D), to secure unit.
When installing without side spray, a One Way Connector (12E) 970-037 must
be used and is to be ordered separately.
13 HOSE ATTACHMENTS
From underneath sink, push Outlet Hose Fiting (13A), firmly onto the Diverter
Receiving Tube (13B) until unable to push any further. Connect Spray Hose
Fitting (13C) into Diverter Oulet Collet (13D) until unable to push any further. Pull
out on connection Fittings (13A & 13C). If the Fittings (13A & 13C) and the Inner
Collets (13E) separate slightly but do not pull off, the connections are secure.
14 SOAP DISPENSER INSTALLATION
Pour in liquid soap (not included) into Shank Orifice (14A). Insert Pump
Mechanism (14B) into Soap Dispenser Shank (14C). Install Dispenser Head
(14D) by pushing firmly onto Pump Mechanism (14B).
4
13D
11A
12A
12E
14A
11B
12B
12C
12D
13C
13B 13A
13A 13E
13D
13C
13E
13B
14C
14B
14D
12E