English, Installation – Pfister GT26-4DSS User Manual

Page 2

ENGLISH

ENGLISH

Thank you for purchasing this Price Pﬁster product. All Price Pﬁster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This valve is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price

Pﬁster recommends calling a professional if you are uncertain about installing
this product!

This product should be installed in accordance with all local and state plumbing and
building codes.

2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.

3 TOOLS RECOMMENDED

•Plumber's putty

•Slotted screwdriver

•Pliers

•Adjustable wrench •Flashlight

•Cloth

Your installation may require new supply lines and / or shut-off valves or other
additional tools.

INSTALLATION

4 CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included:

A Spout Body

B Control Body

C Side Spray

D Hose Guide

E Gaskets (2X)

F Washers (2X)

G Locknuts (2X)

H Soap Dispenser

J Diverter

K Clip

If any of these items are missing, please contact Price Pﬁster Consumer Services
at 1-800-Pfaucet (1-800-732-8238).

5 SPOUT BODY INSTALLATION

Place Gasket (5A) under base of Spout Body (5B). From above sink, insert
Mounting Shank (5C) through center hole of sink.

6 SECURING SPOUT BODY

From underneath sink, place large Plastic Washer (6A), and Locknut (6B) onto
Mounting Shank (6C). Tighten faucet ﬁrmly to sink.