Asus A7N266-VM - Manual (Page 88)

70 Chapter 5: Software support
5.3.3 Installation of PCI Drivers: Win98
Use the Device Manager to uninstall all previously installed system drivers
to prevent conflict with the installation and operation of nVidia
® drivers.
Three nVidia ® drivers need to be installed to operate with the Win98:
1. PCI System Management Bus.
2. PCI Standard Host CPU Bridge.
3. PCI Standard RAM Controller.
ITEM 1: PCI System Management Bus
1. Go to the “Device Manager.”
2. Select “PCI System Management Bus” in “Other Devices.”
3. Click on “Properities.”
4. Click on “Driver.”
5. Select “Update Driver.”
6. Select “Search for a better driver than the one your device is using
now” option.
7. Click on “Specify the location” and then type or browse for the path on
the CD ROM Drive:\Drivers\Chipset\Nvidia\win9x\SMbus. This installs
the driver.
8. Click “Next.”
9. The “PCI System Management” is detected.
10. Continue to install more drivers.
ITEM 2: PCI Standard Host CPU Bridge (GART driver)
1. Go to the “Device Manager.”
2. Select “PCI standard Host CPU Bridge” in “System Devices.”
3. Click on “Properities.”
4. Click on “Driver.”
5. Select “Update Driver.”
6. Select “Search for a better driver than the one your device is using
now” option.
7. Click on “Specify the location” and then type or browse for the path on
the CD ROM Drive:\Drivers\Chipset\Nvidia\win9x\Gart. This installs
the driver.
8. Click “Next.”
9. You should see that the “AGP Host to the PCI Bridge” is detected.
10. Continue to install the next driver.