Asus A7N266-VM - Manual (Page 34)

22 Chapter 2: Hardware information
5) Clear RTC RAM (CLR_CMOS)
This jumper clears the Real Time Clock (RTC) RAM of date, time, and system
setup parameters in CMOS. The RAM data in CMOS is powered by the
onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Short the solder points momentarily with a paper clip or other
delicate metal instrument.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the key during the boot process and enter BIOS
setup to re-enter data.
A7N266-VM
®
A7N266-VM Clear RTC RAM
1 2
CLRTC
Normal Clear CMOS
2 3
(Default)