beautypg.com

Technical data, Installation, Positioning – AEG A92860GNX0 User Manual

Page 19: Location

background image

TECHNICAL DATA

A92860GNB0

A92860GNX0

Dimension

Height

1810 mm

1810 mm

Width

595 mm

595 mm

Depth

650 mm

650 mm

Voltage

230 V

230 V

Frequency

50 Hz

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

Water pressure range

The water pressure must be at least 1 bar (100kPa)

Consult your installer if water pressure is

less than 1 bar.

Highest allowed water pressure 10 bar (1000kPa)

If water pressure exceeds 10 bar a re-

duction valve must be fitted (available

from your specialist shop).

• Do not connect the appliance in spaces where ambient temperature can decrease to be-

low freezing.

• The appliance may only be connected to drinking water supplies.
• The appliance may only be connected to cold water supplies.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

Climate class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Location

To ensure best performance, if the appliance is positioned below an overhanging wall unit,

the minimum distance between the top of the cabinet and the wall unit must be at least 40

Technical data

19

This manual is related to the following products: