beautypg.com

Replacing the lamp, Closing the door – AEG A92860GNX0 User Manual

Page 18

background image

Problem

Possible cause

Solution

The appliance has no power.

There is no voltage in the mains

socket.

Connect another electrical appli-

ance to the mains socket. Check

fuse. Contact a qualified electri-

cian.

No ice.

The ice maker is not switched

on.

Refer to "Switching on and off

the ice maker".

No water supply.

Carry out the necessary measures

on the water supply.

The ice dispenser lamp and

the child look indicator

flashes.

Leakage in the connection box.

Contact service.

The ice channel in the door is

blocked.

Remove the obstacle.

No water supply.

Carry out the necessary measures

on the water supply.

Reset the system by pressing the

button 2 on the ice dispenser.

The lamp does not work.

The lamp is defective.

Refer to "Replacing the lamp".

The door has been open to long.

Close the door.

Door interferes with venti-

lation grill.

The appliance is not levelled.

Refer to "Levelling".

Misaligned door.

The appliance is not levelled.

Refer to "Levelling".

As much as the advice does not lead to result, call the nearest brand-mark service.

Replacing the lamp

The appliance is equipped with a longlife LED interior light.

Only service is allowed to replace the lighting device. Contact your Service Center .

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

18

What to do if…

This manual is related to the following products: