Airlink101 ANAS250 - Manual (Page 10)

-10-
“http://FileServer” to access the Web Control Panel after you submitted your changes.
The Language setting is used to recognize files with characters other than English. If
you have trouble reading your files on the HOMENAS, please select the appropriate
language.
When you reset the HOMENAS, either by the hardware switch or through the web
control panel, all the settings will return to the default setting including the
hostname. The default hostname will remain as HOMENAS-XXXX (where XXXX is
the last four digits of the MAC address).
3.2 IP Configuration
The administrator may use this option to manually define the IP address of the
HOMENAS.
If the hub/router/switch in your network has a DHCP server, then the HOMENAS will
automatically be assigned an IP address.
The HOMENAS can also act as a DHCP server when one is not present in your
network. The default IP of the HOMENAS in DHCP server mode is “169.254.0.1”
and any device that is linked to the network containing will be assigned an IP of
“169.254.0.x” automatically.