Versa-Matic 2 Elima-Matic 3-A Certified (E2) - Manual (Page 5)

e2mdlCsm3A-rev0714
www
.
versamatic
.
com Model E2 3-A Sanitary •
2
Performance
E2 - 2” 3-A Sanitary Pump – Metallic Center
PTFE FITTED
Flow Rate
Adjustable to . . . . . . . 0-147 gpm (556 lpm)
Port Size
Suction . . . . . . . . . . . . . . . . . 2" TRI-CLAMP
Discharge. . . . . . . . . . . . . . . 2" TRI-CLAMP
Air Inlet . . . . . . . . . . . . . . . . . . . . . . 1/2" NPT
Air Exhaust . . . . . . . . . . . . . . . . . . . 1" NPT
Suction Lift
Dry . . . . . . . . . . . . . . . . . . . . . . . . .9' (2.7 m)
Wet. . . . . . . . . . . . . . . . . . . . . . . .27' (8.2 m)
Max Solid Size (Diameter)
. . . . . . . . . . . . . . . . . . . . . . . 5/8" (15.8 mm)
Max Noise Level . . . . . . . . . . . . . 98 dB(A)
Shipping Weights
Stainless. . . . . . . . . . . . . . .125 lbs (56.7 kg)
Discharge Head in PSI
0
140
120
100
80
60
40
20
0
Capacity in Liters Per Minute
Capacity in U.S. Gallons Per Minute
Capacity Per Stroke, 0.35 Gal. (1.32 L)
AIR CONSUMPTION IN SCFM
AIR PRESSURE IN PSI
SCFM M3/HR
10 17
20 34
40 68
60 102
80 136
100 170
120 204
140 240
0 20
80 160 240 320 400 480 560 640
10 20 40
60 80
100
120
140
40 60 80 100 120 140 160
Meters Feet
0 0
40
80
120
160
200
240
280
10
20
30
40
50
60
80
90
70
NOTE: Performance based on the following: elastomeric fitted pump, flooded suction, water at
ambient conditions. The use of other materials and varying hydraulic conditions may result in
deviations in excess of 5%.
Materials
Material Profile: Operating
Temperatures:
Max. Min.
Virgin PTFE: (PFA/TFE) Chemically inert, virtually impervious.
Very few chemicals are known to chemically react with PTFE;
molten alkali metals, turbulent liquid or gaseous fluorine and
a few fluoro-chemicals such as chlorine trifluoride or oxygen
difluoride which readily liberate free fluorine at elevated
temperatures.
220°F
104°C
-35°F
-37°C
Maximum and Minimum Temperatures are the limits for which these materials can be operated.
Temperatures coupled with pressure affect the longevity of diaphragm pump components.
Maximum life should not be expected at the extreme limits of the temperature ranges.
Metals:
Stainless Steel: Equal to or exceeding ASTM specification A743 CF-8M for corrosion
resistant iron chromium, iron chromium nickel and nickel based alloy castings for
general applicaitons. Commonly referred to as 316 Stainless Steel in the pump industry.
For specific applications, always consult the Chemical Resistance Chart.
CAUTION! Operating temperature limitations are as follows:
1: PUMP
SPECS