Poly-Tex FB3003 - Manual (Page 3)

ASSEMBLY INSTRUCTIONS
3
3' x 6' BENCH TOP
1'-6 x 6'
BENCH TOP
1'-6" x 6' BENCH TOP
STABILIZERS
END STAND
NORSTAD CLIP
SEE FIGURE 1
INSTRUCTIONS:
1. ATTACH BOTH STABILIZERS TO END STAND STUDS USING
NYLON WASHERS AND WING NUTS.
2. PLACE ALL BENCH TOPS ON END STANDS.
3. SECURE BENCH TOPS WITH NORSTAD CLIPS AND THUMB
SCREWS. SEE FIGURE 1
NORSTAD CLIP
THUMB SCREW
END STAND
BENCH SUPPORT
BENCH TOP
FIGURE 1
USE CAUTION
DURING ASSEMBLY
PINCH HAZARD