Poly-Tex FB3003 - Manual (Page 11)

OPTIONAL END CAP ASSEMBLY INSTRUCTIONS
11
END CAP CLIP
WING NUT
STOP TAB
END CAP BRACKET
END CAP BENCH
1. WITH 3' x 6' BENCH TOP REMOVED,
PLACE END CAP BRACKETS ON
END STANDS AS SHOWN.
2. SET 3' x 6' BENCH TOP BACK
ONTO BENCH ASSEMBLY. SET
END CAP BENCH ONTO
BRACKETS.
3. ATTACH END CAP CLIP WITH
STOP TAB, LOCK WASHER,
AND WING NUT AS SHOWN
IN DETAIL BELOW. REPEAT FOR
OTHER END CAP BRACKET.
END CAP
BRACKET
END CAP BENCH