ODL Tubular Skylight Solar Powered Dimmer - Manual (Page 7)

3
4
3
Install Solar Powered Dimmer
2
Flat Screwdriver
Ladder
Safety Glasses
Gloves
TOOLS
4
Retape the seam of the top and bottom Adjustable
Tube with the included Foil Tape.
Position the Dimmer onto the Ceiling Trim Ring and
snap it down onto the lock tabs.
1
2
Insert the Solar Panel into its slot and connect its
cable to the Dimmer. Be sure the Solar Panel’s “black
box” is facing outward and toward the top.
In some cases, you may have to use Tin Snips or Metal
Shears to shorten the length of the adjustable tube.
NOTE
You may need another person to support the Ceiling Ring
from below to protect the ceiling drywall from damage,
or put hand through opening to support Trim Ring.
TIP
1
3
Lower and snap the bottom Adjustable Tube into
the lock tabs of the Dimmer. Be sure that the
Solar Panel’s cable is not obstructing the tube from
snapping into the Dimmer.
Black Box
If due to tight constraints of the attic, the Solar Panel
may be connected and installed from the room below
by reaching through the Ceiling Ring.
TIP
5
Replace any insulation that may have moved.
Dimmer can be covered with insulation.
6