ODL Add-on/DIY Blinds —flush frame door glass - Manual (Page 5)

MAINTAIN
■ Frame can be washed with soap and water. Glass can be cleaned with a quality
window cleaner.
■ Frame can be painted with acrylic latex paint or stained using a “gelled” wood
stain or artist oil.
■ To remove treatment from door, pull lower corners free from Lock-Tight. Once
disengaged, carefully lift the unit off of top bracket.
■ To re-install the unit, hang frame according to installation instruction
Step 6. Once it is secure on the top bracket, firmly press on lower corners of
frame to engage the Lock-Tight.
■ For best performance, shade should not be left in raised position for extended
periods of time and should be “excercised” - raised and lowered on a regular
basis to prolong fabric life.
ENCLOSED TREATMENT INSTALLATION INSTRUCTIONS
5
OPEN/CLOSE
(blind only)
Slide left hand tab
up or down to tilt
the blind.
RAISE/LOWER
Slide right hand tab up
and down to raise and
lower the blind/shade.
PREVENTING CONDENSATION
Interior condensation is caused by excess humidity in your
home. Enclosed Treatments do not cause condensation, but
are a good indicator of humidity levels that are too high.
Keep in mind that new homes release moisture from
construction materials through several heating and cooling
sessions.
To the right is a quick guide to appropriate
humidity levels:
If your door glass has interior condensation, you should be
able to control it by reducing the humidity level in your home
(for example you could reduce or eliminate humidifiers). You can also help limit the potential for condensation by removing
the filler strips located on the sides of your Enclosed Treatment frame (see step 1 for removal instructions). By removing
these filler strips you will increase the airflow between the enclosed treatment unit and your door glass.
Condensation does not indicate a defect in an Enclosed Treatment unit and will not damage your Enclosed Treatment unit.
For assistance with enclosed treatment installation or for additional product information, call ODL customer service toll free at
1.866.ODL.4YOU (635-4968), or visit our website at www.odl.com
Outside Temperature F Inside Humidity
20 F to 40 F Not over 40 %
10 F to 20 F Not over 30 %
0 F to 10 F Not over 25 %
-20 F to 0 F Not over 20 %
Below -20 F Not over 15 %
Maximum Recommended Humidity Levels
(based on inside home temperature of 70 F)
OPERATION