MoJack Workbench Attachment - Manual (Page 9)

MoJack WorkBench
9
Right Sled 2
Left Sled 1
WorkBench Inserts 3
Assembly Instructions for use with MoJack PRO
STEP 1
Remove MoJack WorkBench from package.
Inventory items to be certain all parts and hardware
are present. If any parts or hardware are missing,
please contact MoJack at 1-877-575-3173 or
email us at [email protected].
STEP 4 (Optional)
Place the WorkBench Inserts onto the
Left and Right Sleds and as shown. 3
1 2
Push Pin
Left Sled 1
Right Sled 2
Push Pin
STEP 3
Slide the Left and Right Sleds and into
the Lift Arm and secure with Push Pins that are
used to secure the wheel pads of the MoJack
as shown. 1 2
STEP 2
Slide Sled Inserts onto
Sleds and , and secure
using Cap Screws and
Nylock Nuts and tighten
as shown. 4
1 2
7
8
Right Sled 2 Left Sled 1
Sled Insert 4
Cap Screw 7
Nylock Nut 8 Nylock Nut 8
Lift Arm