Avalon Acoustics AVALON ASCENDANT - Manual (Page 9)

9
2.3 Replacing Grille Pins
The grille pins installed on the grille assemblies are fragile and can be easily
damaged. Should any of the pins break, you may replace them using the following
procedure.
I . Place the grille assembly face-down on a padded surface (a towel
or carpeting).
2. Remove the damaged grille pin by pulling it straight out with a
small pliers or similar tool. Please refer to figure 2.4. Make sure
that the complete pin is removed and that there are no pin
fragments left in the mounting hole.
Figure 2.4 - Remove grille pin. Check for pin fragments in the mounting hole.
3.
Insert the new grille pin in the grille pin installation tool (see figure
2.5).
Figure 2.5 - Insertion of new grille pin into installation tool.
4.
Carefully pull the grille cloth away from the frame mounting hole. The
mounting hole must be clear of all obstacles during pin
installation.