4 stand mounting, 4 software – IEI Integration IOVU-751R User Manual

Page 45

IOVU-751R-CE5/UX-R10 User Manual

Page 36

4.3.4 Stand Mounting

The IOVU-751R has Video Electronics Standards Association (VESA) standard mounting

holes tapped into the rear panel. The monitor stand mounting plate has a matching VESA

hole pattern. To mount the IOVU onto a stand, please follow the steps below.

Step 1:

Line up the threaded holes on the monitor rear panel with the screw holes on the

monitor stand mounting plate.

Step 2:

Secure the monitor to the stand with the supplied retention screws (

222H222H

Figure

4-17

Step 0:

Figure 4-17: Stand Mounting

4.4 Software

The IOVU-751R-CE5/UX-R10 comes with a pre-installed Windows CE 5.0 or Linux 2.6.x

operating system and a rich software application development kit. For information about

configuring the operating system, adding remote management tools or additional software

and drivers, refer to the user manuals on IEI IOVU Utility CD that came with the

IOVU-751R-CE5/UX-R10. The IOVU includes the following software: