1 wall mounting, Figure 5-16: wall-mounting bracket – IEI Integration AFL2-17A-H61 v1.02 User Manual

Page 70

AFL2-17A/AB-H61

P a g e 51

5.13.1 Wa ll Mo u n tin g

To mount the flat bezel panel PC onto the wall, please follow the steps below.

S te p 1:

Select the location on the wall for the wall-mounting bracket.

S te p 2:

Carefully mark the locations of the four screw holes in the bracket on the wall.

S te p 3:

Drill four pilot holes at the marked locations on the wall for the bracket retention

screws.

S te p 4:

Align the wall-mounting bracket screw holes with the pilot holes.

S te p 5:

Secure the mounting-bracket to the wall by inserting the retention screws into

the four pilot holes and tightening them (Figure 5-16).

Figure 5-16: Wall-mounting Bracket