C.5 other information, Ther, Nformation – IEI Integration AFL-W19A_W19B_17D_W15A-GM45 v2.10 User Manual

Page 125

AFL-W19A/W19B/17D/W15A-GM45 Panel PC

Page 113

C.5 Other Information

C.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller

When the system uses AHCI mode or some specific SATA controllers such as ALi M5283

or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key

recovery. Please follow the steps below to install the SATA RAID/AHCI driver.

Step 1:

Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into

a USB floppy disk drive. The SATA RAID/AHCI driver must be especially

designed for the on-board SATA controller.

Step 2:

Connect the USB floppy disk drive to the system.

Step 3:

Insert the One Key Recovery CD into the system and boot the system from the

CD.

Step 4:

When launching the recovery tool, press <F6>.