IEI Integration NOVA-HM551 v1.00 - Manual (Page 77)

NOVA-HM551 5.25" SBC
Page 63
Step 3: Connect the audio devices. Connect speakers to the line-out audio jack.
Connect the output of an audio device to the line-in audio jack. Connect a
microphone to the mic-in audio jack. Step 0:
4.7.2 Keyboard/Mouse Connector
The NOVA-HM551 is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
NOVA-HM551 and branches into two cables that are each connected to a PS/2 connector,
one for a mouse and one for a keyboard. To connect the keyboard/mouse Y-cable
connector please follow the steps below.
Step 1: Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Chapter 3.
Step 2: Align the connectors. Correctly align pin 1 on the cable connector with pin 1 on
the NOVA-HM551 keyboard/mouse connector. See Figure 4-14.
Step 3: Insert the cable connectors . Once the cable connector is properly aligned with
the keyboard/mouse connector on the NOVA-HM551, connect the cable
connector to the on-board connectors. See Figure 4-14.