IEI Integration IMB-Q670 v2.01 - Manual (Page 109)

IMB-Q670 Micro-ATX Motherboard
Page 95
5.3.9.1 Serial Port 7 Configuration
Î Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.
Î
Disabled Disable the serial port
Î
Enabled D EFAULT Enable the serial port
Î Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.
Î
Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.
Î
IO=2C0h;
IRQ=10
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ5
Î
IO=2E0h;
IRQ=10, 11
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ10, 11
Î
IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11
Î
IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11
Î
IO=2B0h;
IRQ=10, 11
Serial Port I/O port address is 2B0h and the interrupt
address is IRQ5
Î
IO=2B8h;
IRQ=10, 11
Serial Port I/O port address is 2B8h and the interrupt
address is IRQ10, 11
Î Device Mode [Normal]
Use the Device Mode option to change the serial port mode.