4 usb cable (dual port) with slot bracket, Figure 4-13: sata power drive connection – IEI Integration PCIE-Q670 v2.00 User Manual

Page 72

PCIE-Q670 PICMG 1.3 CPU Card

Page 57

Figure 4-13: SATA Power Drive Connection

4.5.4 USB Cable (Dual Port) with Slot Bracket

The PCIE-Q670 Series is shipped with a dual port USB 2.0 cable. To connect the USB

cable connector, please follow the steps below.

Step 1:

Locate the connectors. The locations of the USB connectors are shown in

Chapter 3.

Step 2:

Align the connectors. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the PCIE-Q670 Series USB connector.

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.