IEI Integration SPCIE-C2060 v2.12 - Manual (Page 68)

SPCIE-C2060 PICMG 1.3 CPU Card
Page 52
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers (Figure 4-10). A key on the front of the cable connectors ensures the
connector can only be installed in one direction.
Figure 4-10: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis.
4.5.2 DVI-D/USB Kit Installation (DVI Model Only)
The DVI-D/USB kit, consisting of one DVI-D and four USB ports, connects to the DVI-D
and USB connectors on the SPCIE-C2060 Series. To install the DVI-D/USB kit, please
follow the steps below.
Step 1: Connect the cables to the DVI-D/USB kit. Connect the included cables to the
DVI-D/USB kit.
Step 2: Connect the cables to the board. Connect the other ends of the included
cables to the board.