Asus WL-330 - Manual (Page 7)

7 ASUS Pocket Wireless Access Point (WL-330)
English
Quick Start Guide
Setting up your access point (AP mode)
To setup your access point (AP):
1. The Setup Wizard auto-detects
and displays the device SSID,
channel, encryption, MAC, and IP
addresses. Click Configure to
change these settings.
2. Enter the Network Name (SSID)
and channel you wish to use.
Click the WEP link or the
Encryption tab to set the WEP
encryption.
IMPORTANT! A wireless
client must have the same
SSID and WEP encryption
settings with the ASUS
Pocket Wireless AP to
establish connection.
3. Configure the AP WEP
encryption. Click OK when done.