AT&T Spirit Communications System - Manual (Page 30)

Paging/Programmable Buttons
28
Paging (308/616 System) Both paging features may be programmed on buttons numbered
26 and 27 on 24-button telephones.
■ Page to All Intercom Extensions
● Press INTERCOM. ● Lift receiver (or press SPEAKER). ● Dial 61. Make announcement.
NOTE: Only one person may answer a page to all intercom extensions. All other extensions
are disconnected from the page when someone answers.
■ Loudspeaker Paging (For systems with optional public address system)
● Press INTERCOM. ● Lift receiver (or press SPEAKER) ● Dial 60. Make announcement.
Programmable Buttons (308/616 System, 24-button telephones only)
Buttons labeled 26 and 27 can be programmed by you (1) to manually signal another intercom
extension, or (2) for one of the paging features described above.
NOTE: To program buttons on telephone 10, the controller administration switch must be OFF.
■ Programming Button for Manual Signal
●
Press INTERCOM.
●
Lift receiver (or press SPEAKER).
●
Dial ✱ 0 (zero).
●
Dial intercom
extension number of telephone you want to signal.
●
Press button you want to program (button
26 or 27).