WolfVision VZ-5B - Manual (Page 3)

16 16 17 17
18 18
ZOOM ZOOM
AUTO
FOCUS AUTO
FOCUS
Camera controls (3):
Connectors (9):
VZ-5b:
1 Video camera head
2 Light
3 Camera controls
(as shown below)
4 Working surface
5 Power on/off switch
6 Light switch
7 Close up lens for camera
8 Knurled wheel
9 Connectors (on back,
16 Zoom out button
17 Zoom in button
18 Auto focus on/off button
(the auto focus is continuously
operating when the red light is on)
12 Composite video output (VBS)
13 Y/C (S-VHS) output
14 DC input (12 V)
15 DC output for light box
12 12 13 13 14 14 15 15
7
8
9
5
6
4
3 3
2
1 1
POWER LIGHT S-VHS VIDEO
Autofocus:
When switching on the unit the
autofocus is automatically switched
on too. The correct focus is
continuously adjusted at a very high
speed.
When the autofocus is switched on
the red light on the autofocus on/off
switch (18) is on.
Please note that objects with a very
low contrast (like a blank sheet of
paper) are difficult to focus. If the
autofocus does not work just move
the object slightly.
For special applications the autofocus can also
be switched off using the on/off switch (18).
Manual focusing:
1. Place an object at the level you whish to
focus - The autofocus is focusing the object.
2. Switch off the autofocus with the on/off
switch (18) - The focus remains unchanged
Connect the power cord to the light box
connector (15) on the back side of the
VZ-5b.
The light switch (6) of the VZ-5b can
now be used to switch between the light
of the VZ-5b and the light of the lightbox.
Lightbox Handy
(optional)
:
ENGLISH