Alcatel-Lucent TEMPORIS 22 - Manual (Page 2)

1. SETUP
l Plug one end of the spiral cord into the handset plug (A), and the other end into the
socket located on the left-hand side of the phone (B).
l Plug the telephone cord into the socket (C) situated on the back of the set and plug
the other end (D) into the telephone wall socket.
NOTE: The spare socket (E) enables a modem to be connected.
l Stick the emergency number label in the appropriate place.
2. WALL MOUNTING
To mount your telephone set on the wall, remove the wall mounting peg and put it back
in reverse position as described below. Bore two 6mm-large holes, spaced 70 mm apart.
Put two plugs in place, then, place in two screws (3.5 mm Ø and 25 mm long) without
tightening them.
Place the cord in the slot situated underneath the set.
B A
D
E
C
Wall mounted position Horizontal position
Tempori_22_uk.qxd 29/05/01 17:05 Page 2