Acumen EON-2028HS - Manual (Page 42)

38
Tips:
During recording, you should relax yourself and bring your body down to a
comfort rest by taking deep slow breathes.
Rest Heart Rate (blinking)
- Press STR/LAP Button
B or STP/Reset Button C
to adjust the value.
- Press MODE/NXT Button D to proceed to Phase 2.
Step 3
Step 4
Phase 2: 1600M or 1.0 Mile Assessment
This assessment allow the watch to find out the physiological changes of
your body at a normal speed. You will need to find a standard 400M field
track or 1 Mile distance to finish the assessment.
Note: Before assessment, please make sure the Heart Rate Transmitter is
attached on your chest properly.
LAP
completed (i.e. a circle is displayed).
LAP
- Press MODE/NXT Button D to proceed to Phase 2.
Note:
1) When recording the rest heart rate, press any
button will have no respondence except EL Button .
2) If no heart rate signal is detected during recording, the watch will
display the "REST HR ERR" and automatically return to HR input
Manual/Auto Display.
Part II
D
B
D C