AVERATEC N1000 Series - Manual (Page 48)

3-4
Customizing this Notebook
Connecting an External Monitor
You can connect an external monitor to your notebook through the VGA port
for a larger view with higher resolution. To connect the monitor:
1. Make sure that the notebook is turned off.
2. Plug the monitors D-type connector into the notebooks VGA port.
3. Connect the monitors power cord and turn on the monitor.
4. Turn on the notebook and the monitor should respond by default. If not,
you can switch the display mode by pressing [Fn]+[F2]. Alternately, you
can change the display mode by configuring the settings in Display
Properties of Windows operating system.
Monitor(not included)
VGA port