AVERATEC N1000 Series - Manual (Page 29)

2-12
Getting Started
Power Management
AC Adapter
Please note it is strongly recommended to connect the AC adapter and use the
AC power while using this notebook for the first time. When the AC adapter is
connected, the battery will begin charging immediately.
NOTE that the AC adapter included in the package is approved for your
notebook; using other adapters from other manufacturers may damage the
notebook or other devices on the notebook and will void the warranty of your
unit.
Connecting the AC Power
1. Unpack the contents to find the AC adapter and power cord.
2. Attach the power cord to the connector of the AC adapter.
3. Plug the DC end of the adapter
to the notebook, and the male
end of the power cord to the
electrical outlet.
Disconnecting the AC Power
When you disconnect the AC adapter, you should:
1. Unplug the power cord from the electrical outlet first.
2. Unplug the connector from the notebook.
3. Disconnect the power cord and the connector of AC adapter.
4. When unplugging the power cord, always hold the connector part of the
cord. Never pull the cord directly!