Waterstone FILTRATION FAUCETS 1900HC - Manual (Page 4)

A
B
C
1. 2. 3.
4. 5. 6.
COUNTER
OR SINK
D
E
F
H
G
J
EXTEND 1/4”
Slide large washer (D) and star lock washer
(E) onto shank. Thread the nut (F) and hand
tighten underside of sink or counter.
Turn faucet to the desired handle position.
Securely tighten nut with adjustable
wrench.
Slide compression nut
(G) over end of supply
tube. Slide ferrule (H)
onto end of supply
tube, long tapered
end first. Push tube
insert (J) into top of
supply tube.
Slide ferrule until 1/4”
of tubing is showing
out the end.
COLD ONLY FILTRATION FAUCET INSTALLATION
Slide escutcheon plate (A) and clear vinyl
washer (B) onto threaded shroud (C) and
up to base of faucet. Fit faucet shank through hole on counter
or sink. (No plumbers putty is required.
Vinyl washer seals base).
Insert extended
portion of tubing and
tighten compression
nut to end of faucet
shank with wrench.