Airlink101 AP421W User Manual

Page 5

Text mode
Original mode

Step 1

Open your Web Browser (Internet Explorer or Netscape), enter the IP Address of the Access

Point (default: 192.168.1.250) in the Address Bar and press Enter.

Section 3

Using Web Configuration Utility

Step 2

Enter admin for both the User name and Password and click OK.

You can use the Access Point’s built-in Web Configuration Utility to configure the encryption settings and
operating modes. This section describes how to configure the Access Point’s wireless and security
settings. For information on the different operating modes, please refer to Section 4, Selecting
Operating Modes.

Note: If you have changed the IP Address of the Access Point, enter its
new IP Address instead of the default.