WansView NCM628W User Manual
Page 11
10
Figure 7
1) Please go to the setting interface of
Router, and choose “Port Forwarding”;
2)
Choose “Add custom Service” ;
3) Input IP camera http port;
4)
Input LAN IP Address of the camera, click “Apply” (port number and IP address as
you set in figure 2）
After finishing the port forwarding, you can use WAN IP address of router and http port of
camera to visit the camera by remote computer as figure 6.
Notice: because the routers are different, so the interface and setting method of router
are also different, how to do the port forwarding for various routers, please refer to the
user manual of your router or consult with router manufacturer.