beautypg.com

WansView NCZ555MW User Manual

Page 2

background image

Z series IP camera user manual

2

If the user manual can not help you to solve the problem, please call our technology center for

the solutions. We will update the content for the new functions without notice.

1 Installation Environment

 Keep away from the places for high-temperature, heat source and direct sunlight;
 Keep away from water and when get wet, cut off the power immediately.
 Avoid to use in damp environment, the reference range for operation humidity is below

85%RH.

 Avoid to use in overheating and too cold environment, the reference range for operation

temperature is -10℃~ +50℃

 Please install it horizontally or wall mounting, avoid to strenuous vibration place and not put

other equipments onto the item

2 Transport and Handling

 The package is well-designed to ensure the security during the delivery, so please do not

change the package at random.

1) Do not move the ip cameras from overheated to supercooled condition

frequently, otherwise

it will frost and shorten the service life.

2 Do not move the item when is power on, otherwise the main board might be damaged.

Notice:

1.

Please check the power supply before it is working

2.

Be careful not to bang the camera or subject it to strong impacts or shocks.

3.

Do not directly touch the optical components for the image sensor, if necessary, please

place a clean and moistened cloth with alcohol and wipe the dirt gently; When not in use,

please place the dust cover on to the item to protect the image sensor.

4.

Do not aim the camera directly into the sun or at other intense light sources that could affect

the image quality (it is not the problem for the ip camera), also shorten the service life for the

image sensor.

5.

Keep away from laser when it is working, otherwise the image sensor can be damaged.

6.

If the equipment is not working properly, please contact the store or the service center, do

not disassemble or modify the equipment in any way. (Problems caused by unauthorized

modification or repair should be at your own risk.)

Statement

Notice