Agilent Technologies E5805A - Manual (Page 16)

12 E5805A USB/RS232 Interface
E5805A USB/RS232 Interface
The Advanced tab allows you to do the following:
• Uninstall the drivers.
• Enable Event Logging – Place event messages in the
system event log.
• Configure how COM ports are assigned.
The driver supports COM port number assignment in two
ways:
1 Assign COM ports based on the converter serial number.
This is the default setting. In this mode, the driver uses the
serial number of each converter to uniquely identify it, and
the COM port assignments for a given converter are based on
its serial number. No matter which physical USB port a
converter is plugged into, it maintains its assigned COM port
numbers.
2 Assign COM ports based on physical USB port.