ACTiSYS ACT-IR8250SW - Manual (Page 18)

The Infrared Wireless Expert
ACT-IR8250SW
User’s Manual
9. When you see the “Download
completed!” message which
means you have successful
updated the firmware.
If you do not remove and restore
J10 at step 8 correctly, or you click
the “Abort” button, or anything to
stop the download progress, you
will get the Error message shown
on the right side.
If this is the case, you will have to
check the IR8250SW settings,
COM port, AC adaptor, firmware
files or IR82x0PEK board. If all
right, click the Download button
again for complete download
progress.
Page 17 of 20 Version 0.12
April 09, 2004
© Copyright 2003-2004 ACTiSYS Corp.