Tyrex TY0200 - Manual (Page 6)

TyRex TOOL & PARTS WARRANTY
This tool has been designed and constructed using
the highest standards of material and workmanship.
TOOL AND PARTS WARRANTY:
The length of this guarantee is one year from date of purchase by the original retail purchaser. During this period, Rex Commer-
cial Tools and Fasteners, LLC, will repair or replace at Rex’s option, any original part or parts for the original retail purchaser. This will be done
free of charge, provided the parts are determined defective in materials or workmanship upon examination by a TyRex Authorized Warranty
Service Center (exception: power cords and bits). Any replacement part provided will carry a warranty for the balance of the period of warranty
applicable to the part it replaces.
This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the tool is present (read Operator
Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the complete tool or part, with transportation
prepaid, to the nearest TyRex Authorized Warranty Service Center, with purchase receipt or other positive proof that the part or tool is
within the warranty period.
THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
EXCLUDED. BUYER’S OR USER’S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. REX COMMERCIAL TOOLS AND FASTENERS,
LLC SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A
RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL DURASPIN’S LIABILITY EXCEED THE
PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL
TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.
Replacement of Tool Due to Natural Disaster
Rex will also replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces
of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registra-
tion card, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier,
police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-396-3318.
Rex Commercial Tools and Fasteners, LLC
CINCINNATI, OHIO 45245-1213 USA
TECHNICAL SPECIFICATIONS: TY0100
Weight.without.rail 13.7.oz
Height.without.rail 1.6"
Length.at.1".setting 6.8"
Width
2.1"
Fastener.Capacity 50.screws.(one.strip)
Fastener.Range 1 /
2
-1 1 /
2
".6-#12
ESPECIFICACIONES TECNICAS: TY0100
Peso.sin.el.carril 388g
Alto.sin.el.carril 41.mm
Largo.en.el.1"que.fija 172.mm
Profundidad
53.mm
Capacidad.tornillos 50.tornillos.(una.faja)
Gama.de.tornillos 13-38.mm.de.largo.cuerpo
SPÉCIFICATIONS TECHNIQUES: TY0100
Poids.sans.la.voie 388g
Hauteur.sans.la.voie 41.mm
Longueur.à.1"plaçant 172.mm
Largeur
53.mm
Capacité.fixations 50.vis.(une.bande)
Longueurs.des.fixations 13-38.mm.de.largo.cuerpo
TECHNICAL SPECIFICATIONS: TY0200
ESPECIFICACIONES TECNICAS: TY0200
SPÉCIFICATIONS TECHNIQUES: TY0200
TECHNICAL SPECIFICATIONS: TY0300
ESPECIFICACIONES TECNICAS: TY0300
SPÉCIFICATIONS TECHNIQUES: TY0300
Weight.without.rail 14.6.oz
Height.without.rail 1.6"
Length.at.1".setting 6.8"
Width
2.1"
Fastener.Capacity 50.screws.(one.strip)
Fastener.Range 1 /
2
-2".6-#12
Peso.sin.el.carril 414g
Alto.sin.el.carril 41.mm
Largo.en.el.1"que.fija 172.mm
Profundidad
53.mm
Capacidad.tornillos 50.tornillos.(una.faja)
Gama.de.tornillos 13-51.mm.de.largo.cuerpo
Poids.sans.la.voie 414g
Hauteur.sans.la.voie 41.mm
Longueur.à.1"plaçant 172.mm
Largeur
53.mm
Capacité.fixations 50.vis.(une.bande)
Longueurs.des.fixations 13-51.mm.de.largo.cuerpo
Weight.without.rail 15.1.oz
Height.without.rail 1.6"
Length.at.1".setting 7.8"
Width
2.1"
Fastener.Capacity 50.screws.(one.strip)
Fastener.Range 1 /
2
-3".6-#12
Peso.sin.el.carril 428g
Alto.sin.el.carril 41.mm
Largo.en.el.1"que.fija 198.mm
Profundidad
53.mm
Capacidad.tornillos 50.tornillos.(una.faja)
Gama.de.tornillos 13-76.mm.de.largo.cuerpo
Poids.sans.la.voie 428g
Hauteur.sans.la.voie 41.mm
Longueur.à.1"plaçant 198.mm
Largeur
53.mm
Capacité.fixations 50.vis.(une.bande)
Longueurs.des.fixations 13-76.mm.de.largo.cuerpo