TSI IAQ50 - Manual (Page 7)

7
SECTION 3
Setting-Up
Supplying Power to the Model IAQ50
The Model IAQ50 can be powered in one
of two ways: four AA-size batteries or an
optional AC adapter.
Installing the Batteries
Insert four AA batteries as indicated by the
diagram located on the inside of the
battery compartment. The Model IAQ50 is
designed to operate only with alkaline
batteries, which are included. At 15%
battery life remaining, the battery indica-
tor will show that the batteries need to be
changed.
Using the Optional AC Adapter
The optional AC adapter allows you to
power the Model IAQ50 from an AC
outlet. When using the AC adapter, the
batteries (if installed) will be bypassed.
The AC adapter is NOT a battery charger.