TSI IAQ50 - Manual (Page 36)

36
Symptom Possible
Causes Corrective
Action
Display
reads
“LOG
FULL” You are trying
to enter more
readings than
memory can
handle Read or record
the average;
clear the
sample register
and proceed.
Display
flashes
“Libatt” Low lithium
battery power Return to
factory for
replacement.
SECTION 8
DIP Switch Settings
To access the DIP switches, remove the
batteries from the battery compartment.
On the inside of the battery compartment,
there is a window with eight DIP switches.
The table below shows the functions for
each switch.
Caution:
Make certain that power is turned off
before changing DIP switch settings.