Terk FDTV1A_OMЙ - Manual (Page 6)

FD
TV1a
5
FDTV1a
Built-In
Coaxial Cable
Amplifier
Insert
ANTENNA
TV/STB
TV
Installation
(continued)
2. Connect the FDTV1a’s built-in
cable to the input jack of the
amplifier.
3. Connect the amplifier’s built-
in cable to the antenna input
on your TV.
4. Plug the amplifier’s power
cord into an electrical outlet.
Important: This power unit
should be plugged in so that it
stays vertical or lays flat.
5. Run your TV’s tuner/channel
setup to scan for available
broadcast channels.
To connect the FDTV1a with the amplifier directly to
your TV:
1. Make sure your TV is turned off.